2022
Bahramian, N., Kianfar, S., Stroh, J., Sediako, D., and Tjong, J., An Investigation of the Microstructure and Oil Retention of Electrolyte Jet Plasma Oxidation (EJPO) Coating, in Proceedings Minerals, Metals and Materials Series2022, p. 629-639.
Chandra, A., and Siddiqua, S., 2022, A Novel Application of Bis (2-Hydroxyethyl) Terephthalate to Enhance Sand Bentonite Mixture for Landfills: Journal of Materials in Civil Engineering, v. 34, no. 9.
Cutts, J., and Dyck, B., 2022, Incipient collision of the Rae and Slave cratons at ca. 1.95 Ga: GSA Bulletin.
Dilawar, H., and Eskicioglu, C., 2022, Laboratory and field scale biodegradability assessment of biocomposite cellphone cases for end-of-life management: Waste Management, v. 138, p. 148-157.
Drayson, D., Camacho, A., Sanborn-Barrie, M., Regis, D., Larson, K. P., Osinchuk, A., and DuFrane, S. A., 2022, Deformation history and tectonic significance of the Sanagak Lake shear zone, Boothia Peninsula, Nunavut: Canadian Journal of Earth Sciences, v. 0, no. ja, p. null.
Elmouchi, A., Siddiqua, S., Salifu, E., and Wijewickreme, D., 2022, Muskeg Soil Stabilization Using the Microbially Induced Calcite Precipitation Technique by the Urease Active Bioslurry Approach: Journal of Geotechnical and Geoenvironmental Engineering, v. 148, no. 11.
Elsayed, A., D’Elia, F., Ravindran, C., and Sediako, D., 2022, Observing the Effect of Grain Refinement on Crystal Growth of Al and Mg Alloys during Solidification Using InSitu Neutron Diffraction: Metals, v. 12, no. 5.
Ersay, L., Greenough, J. D., Larson, K. P., and Dostal, J., 2022, Zircon reveals multistage, magmatic and hydrothermal Rare Earth Element mineralization at Debert Lake, Nova Scotia, Canada: Ore Geology Reviews, v. 144, p. 104780.
Gray, D. B., Gagnon, V., Button, M., Farooq, A. J., Patch, D. J., Wallace, S. J., Koch, I., O'Carroll, D. M., and Weber, K. P., 2022, Silver nanomaterials released from commercial textiles have minimal impacts on soil microbial communities at environmentally relevant concentrations: Science of The Total Environment, v. 806, p. 151248.
Graziani, R., Larson, K., Smit, M., Cottle, J. M., Lamming, J., and Piette-Lauzière, N., 2022, Modern style nappe stacking in the Paleoproterozoic lower crust: An example from the snowbird tectonic zone, Canadian Shield: Precambrian Research, v. 380, p. 106817.
Gyomlai, T., Agard, P., Jolivet, L., Larvet, T., Bonnet, G., Omrani, J., Larson, K., Caron, B., and Noël, J., 2022, Cimmerian metamorphism and post Mid-Cimmerian exhumation in Central Iran: Insights from in-situ Rb/Sr and U/Pb dating: Journal of Asian Earth Sciences, v. 233, p. 105242.
Hoseini, A. H. A., Shiraz, M. H. A., Tao, L., Lu, W., Arjmand, M., and Liu, J., 2022, Synthesis of soybean-derived porous carbon as selenium host for high-performance lithium-selenium batteries: Electrochimica Acta, v. 429.
Karanam, A., Prasad, A., Bichler, L., and Birnie-Browne, R., 2022, In-service Performance of High-Manganese Steel Clinker Crusher Hammer: International Journal of Metalcasting, v. 16, no. 2, p. 573-584.
Kavanagh-Lepage, C., Gervais, F., Larson, K., Grazziani, R., and Moukhsil, A., 2022, Deformation induced decoupling between U-Pb and trace elements in titanite revealed through petrochronology and study of localized deformation: Geoscience Frontiers, p. 101496.
Kozakevich, J., Stroh, J., Mallouhi, V., Sediako, D., and Weiss, D., Interplay Between Cooling Rate, Microstructure, and Mechanical Properties of an Al–Ce–Ni–Mn Alloy, in Proceedings Minerals, Metals and Materials Series2022a, p. 83-91.
Kozakevich, J., Stroh, J., Sediako, D., Weiss, D., Loukus, A., and Vogel, S. C., 2022b, Elevated Temperature Creep and Tensile Performance of Extruded Mg-10Ce Alloy: Journal of Materials Engineering and Performance.
Larson, K. P., Cottle, J. M., Camacho, A., Piercey, S., and Grujic, D., 2022a, Miocene anatexis, cooling and exhumation in the Khumbu Himal, Nepal: International Geology Review, v. 64, no. 14, p. 2008-2033.
Larson, K. P., Cottle, J. M., Kylander-Clark, A., and Lageson, D., 2022b, A plate tectonic view from the top of the world: Terra Nova, v. 34, no. 3, p. 224-230.
Larson, K. P., Shrestha, S., Cottle, J. M., Guilmette, C., Johnson, T. A., Gibson, H. D., and Gervais, F., 2022c, Re-evaluating monazite as a record of metamorphic reactions: Geoscience Frontiers, v. 13, no. 2, p. 101340.
Li, W.-T., Ding, H.-X., Zhang, Z.-M., and Larson, K. P., 2022, Petrogenesis of meta-sedimentary rocks in the deep crust of the eastern Gangdese arc: Lithos, v. 430, p. 106884.
Lihter, I., Larson, K. P., Smit, M. A., Cottle, J. M., Ashley, K. T., and Shrestha, S., 2022, Decrypting the polymetamorphic record of the Himalaya: Geology, v. 50, no. 5, p. 588-592.
Liu, H., Basar, I. A., Lyczko, N., Nzihou, A., and Eskicioglu, C., 2022, Incorporating hydrothermal liquefaction into wastewater treatment – Part I: Process optimization for energy recovery and evaluation of product distribution: Chemical Engineering Journal, v. 449, p. 137838.
Soret, M., Bonnet, G., Agard, P., Larson, K., Cottle, J., Dubacq, B., Kylander-Clark, A., Button, M., and Rividi, N., 2022, Timescales of subduction initiation and evolution of subduction thermal regimes: Earth and Planetary Science Letters, v. 584, p. 117521.
Tummalapalli, M. K., Szpunar, J. A., Prasad, A., Malakkal, L., and Bichler, L., 2022, Evaluation of thermophysical properties of UO2-10 Vol% Mo nuclear fuel pellets: Journal of Nuclear Materials, v. 559.
Watts, M., Argyraki, A., Barbieri, M., Brown, A., Button, M., Finkelman, R., Gibson, G., Humphrey, O., Huo, X., and Hursthouse, A., 2022, The society for environmental geochemistry and health (SEGH): 50 years and beyond: Environmental Geochemistry and Health, p. 1-7.
Wu, Z., Zou, J., Shabanian, S., Golovin, K., and Liu, J., 2022a, The roles of electrolyte chemistry in hard carbon anode for potassium-ion batteries: Chemical Engineering Journal, v. 427.
Wu, Z., Zou, J., Zhang, Y., Lin, X., Fry, D., Wang, L., and Liu, J., 2022b, Lignin-derived hard carbon anode for potassium-ion batteries: Interplay among lignin molecular weight, material structures, and storage mechanisms: Chemical Engineering Journal, v. 427.
Zhu, H., Shiraz, M. H. A., Liu, L., Zhang, Y., and Liu, J., 2022, Atomic layer deposited aluminum oxynitride coating for high-performance Si anode in lithium-ion batteries: Applied Surface Science, v. 578.
2021
Ajabi Naeini, A., Siddiqua, S., and Cherian, C., 2021, A novel stabilized rammed earth using pulp mill fly ash as alternative low carbon cementing material: Construction and Building Materials, v. 300, p. 124003.
Archibald, D. B., Macquarrie, L. M. G., Murphy, J. B., Strachan, R. A., McFarlane, C. R. M., Button, M., Larson, K. P., and Dunlop, J., 2021, The construction of the Donegal composite batholith, Irish Caledonides: Temporal constraints from U-Pb dating of zircon and titanite: GSA Bulletin.
Bigul, P., and Sumi, S., 2021, Understanding the Effect of Pulp Mill Fly Ash on Strength, Compressibility, and Microstructure of Organic Soil: International Journal of Geomechanics, v. 21, no. 11, p. 04021209.
Cherian, C., and Siddiqua, S., 2021, Engineering and environmental evaluation for utilization of recycled pulp mill fly ash as binder in sustainable road construction: Journal of Cleaner Production, v. 298, p. 126758.
Dong, H., Larson, K. P., Kellett, D. A., Xu, Z., Li, G., Cao, H., Yi, Z., and Zeng, L., 2021, Timing of slip across the South Tibetan detachment system and Yadong–Gulu graben, Eastern Himalaya: Journal of the Geological Society, v. 178, no. 1.
Graziani, R., Larson, K. P., Law, R. D., Vanier, M.-A., and Thigpen, J. R., 2021, A refined approach for quantitative kinematic vorticity number estimation using microstructures: Journal of Structural Geology, v. 153, p. 104459.
Greenough, J. D., Kamo, S. L., Davis, D. W., Larson, K., Zhang, Z., Layton-Matthews, D., De Vera, J., and Bergquist, B. A., 2021, Old subcontinental mantle zircon below Oahu: Communications Earth & Environment, v. 2, no. 1, p. 189.
Johnson, T. A., Cottle, J. M., and Larson, K. P., 2021, Delineation of multiple metamorphic events in the Himalayan Kathmandu Complex, central Nepal: Journal of Metamorphic Geology, v. 39, no. 4, p. 443-472.
Karanam, A., Prasad, A., Bichler, L., and Birnie-Browne, R., 2021, In-service Performance of High-Manganese Steel Clinker Crusher Hammer: International Journal of Metalcasting.
Kazemi, K. K., Zarifi, T., Mohseni, M., Narang, R., Golovin, K., and Zarifi, M. H., 2021, Smart Superhydrophobic Textiles Utilizing a Long-Range Antenna Sensor for Hazardous Aqueous Droplet Detection plus Prevention: ACS Applied Materials & Interfaces, v. 13, no. 29, p. 34877-34888.
Khan, A., Faisal, S., Larson, K. P., Robinson, D. M., Li, H., Ullah, Z., Button, M., Nawab, J., Farhan, M., and Ali, L., 2021a, Geochemistry and in-situ U-Th/Pb geochronology of the Jambil meta-carbonatites, northern Pakistan: Implications on petrogenesis and tectonic evolution: Journal of Earth Science.
Khan, A., Faisal, S., Larson, K. P., Robinson, D. M., Ullah, Z., Li, H., and Rehman, H. u., 2021b, New geochronological and geochemical constraints on petrogenesis and tectonic setting of the Loe-Shilman carbonatite complex, Northwest Pakistan: Lithos, v. 404-405, p. 106497.
Khanal, G. P., Wang, J.-M., Larson, K. P., Wu, F.-Y., Rai, S. M., Wang, J.-G., and Yang, L., 2021, Eocene Metamorphism and Anatexis in the Kathmandu Klippe, Central Nepal: Implications for Early Crustal Thickening and Initial Rise of the Himalaya: Tectonics, v. 40, no. 4, p. e2020TC006532.
Kianfar, S., Aghaie, E., Stroh, J., Sediako, D., and Tjong, J., 2021, Residual stress, microstructure, and mechanical properties analysis of HPDC aluminum engine block with cast-in iron liners: Materials Today Communications, v. 26, p. 101814.
Larson, K. P., Cottle, J. M., Camacho, A., Piercey, S., and Grujic, D., 2021, Miocene anatexis, cooling and exhumation in the Khumbu Himal, Nepal: International Geology Review, p. 1-26.
Mehdizadeh Omrani, M., Kumar, H., Mohamed, M. G. A., Golovin, K., S. Milani, A., Hadjizadeh, A., and Kim, K., 2021, Polyether ether ketone surface modification with plasma and gelatin for enhancing cell attachment: Journal of Biomedical Materials Research Part B: Applied Biomaterials, v. 109, no. 5, p. 622-629.
Mohseni, M., Recla, L., Mora, J., Gallego, P. G., Agüero, A., and Golovin, K., 2021, Quasicrystalline Coatings Exhibit Durable Low Interfacial Toughness with Ice: ACS Applied Materials & Interfaces, v. 13, no. 30, p. 36517-36526.
Muhammad, N., and Siddiqua, S., 2021, Moisture-dependent resilient modulus of chemically treated subgrade soil: Engineering Geology, v. 285, p. 106028.
Pokharel, B., and Siddiqua, S., 2021, Effect of calcium bentonite clay and fly ash on the stabilization of organic soil from Alberta, Canada: Engineering Geology, v. 293, p. 106291.
Soret, M., Bonnet, G., Agard, P., Larson, K., Cottle, J., Dubacq, B., Kylander-Clark, A., Button, M., and Rividi, N., Slow subduction initiation drives fast mantle upwelling and lithosphere formation2021/04/1 2021a, p. EGU21-14473.
Soret, M., Larson, K. P., Cottle, J., and Ali, A., 2021b, How Himalayan collision stems from subduction: Geology, v. 49, no. 8, p. 894-898.
Stroh, J., Sediako, D., Hanes, T., Anderson, K., and Monroe, A., 2021a, The Effects of Heat Treatment on the Microstructure and Tensile Properties of an HPDC Marine Transmission Gearcase: Metals, v. 11, no. 3, p. 517.
Stroh, J., Sediako, D., and Weiss, D., 2021b, Development of Cerium-Reinforced Specialty Aluminum Alloy with Application of X-ray and Neutron Diffraction: International Journal of Metalcasting, v. 15, no. 1, p. 29-39.
Stroh, J., Sediako, D., and Weiss, D., 2021c, The Effect of Rare Earth Mischmetal on the High Temperature Tensile Properties of an A356 Aluminum Alloy, Light Metals 2021: 50th Anniversary Edition, p. 184-191.
Stroh, J., Sediako, D., and Weiss, D., 2021d, The Effects of Iron-Bearing Intermetallics on the Fitness-for-Service Performance of a Rare-Earth-Modified A356 Alloy for Next Generation Automotive Powertrains: Metals, v. 11, no. 5, p. 788.
Wiltshire, B. D., Mirshahidi, K., Nadaraja, A. V., Shabanian, S., Hajiraissi, R., Zarifi, M. H., and Golovin, K., 2021, Oleophobic textiles with embedded liquid and vapor hazard detection using differential planar microwave resonators: Journal of Hazardous Materials, v. 409, p. 124945.
Wu, Z., Zou, J., Shabanian, S., Golovin, K., and Liu, J., 2022, The roles of electrolyte chemistry in hard carbon anode for potassium-ion batteries: Chemical Engineering Journal, v. 427, p. 130972.
2020
Archibald, D. B., Macquarrie, L. M., Murphy, J. B., Strachan, R., McFarlane, C. R., Button, M., Larson, K. P., and Dunlop, J. N., 2020, The construction of the Donegal composite batholith, Irish Caledonides: temporal constraints from U-Pb dating of zircon and titanite: Bulletin of the Geological Society of America.
Brubacher, A. D., Larson, K. P., Cottle, J. M., Matthews, W., and Camacho, A., 2020, Progressive development of EW extension across the Tibetan plateau: A case study of the Thakkhola graben, west-central Nepal: International Geology Review, p. 1-20.
Button, M., Koch, I., Watts, M. J., and Reimer, K. J., 2020, Arsenic speciation in the bracket fungus Fomitopsis betulina from contaminated and pristine sites: Environmental Geochemistry and Health.
Graziani, R., Larson, K. P., and Soret, M., 2020, The effect of hydrous mineral content on competitive strain localization mechanisms in felsic granulites: Journal of Structural Geology, v. 134, p. 104015.
Johnson, T. A., Cottle, J. M., and Larson, K. P., 2020, delineation of multiple metamorphic events in the Himalayan Kathmandu complex, central Nepal: Journal of Metamorphic Geology.
Larson, K. P., Graziani, R., Cottle, J. M., Apen, F., Corthouts, T., and Lageson, D., 2020a, The structural evolution of the Qomolangma Formation, Mount Everest, Nepal: Journal of Structural Geology, v. 138, p. 104123.
Larson, K. P., Kellett, D. A., Cottle, J. M., Camacho, A., and Brubacher, A. D., 2020b, Mid‐Miocene initiation of E‐W extension and recoupling of the Himalaya: Terra Nova, v. 32, no. 2, p. 151-158.
Larson, K. P., Shrestha, S., Soret, M., and Smit, M., 2020c, The PTtD evolution of the Mahabharat, east-central Nepal: The out-of-sequence development of the Himalaya: Geoscience Frontiers.
Lihter, I., Larson, K. P., Shrestha, S., Cottle, J. M., and Brubacher, A. D., 2020, Contact metamorphism of the Tethyan Sedimentary Sequence, Upper Mustang region, west-central Nepal: Geological Magazine, v. 157, no. 11, p. 1917-1932.
Long, S. P., Kohn, M. J., Kerswell, B. C., Starnes, J. K., Larson, K. P., Blackford, N. R., and Soignard, E., 2020, Thermometry and microstructural analysis imply protracted extensional exhumation of the Tso Morari UHP nappe, northwestern Himalaya: implications for models of UHP exhumation: Tectonics, v. 39, no. 12, p. e2020TC006482.
Piette-Lauzière, N., Larson, K., Kellett, D., and Graziani, R., 2020, Intracrystalline vorticity record of flow kinematics during shear zone reactivation: Journal of Structural Geology, v. 140, p. 104134.
Ruppelt, J. P., Tondera, K., Wallace, S. J., Button, M., Pinnekamp, J., and Weber, K. P., 2020, Assessing the role of microbial communities in the performance of constructed wetlands used to treat combined sewer overflows: Science of The Total Environment, v. 736, p. 139519.
Shrestha, S., Larson, K. P., Martin, A. J., Guilmette, C., Smit, M. A., and Cottle, J. M., 2020, The Greater Himalayan thrust belt: Insight into the assembly of the exhumed Himalayan metamorphic core, Modi Khola valley, central Nepal: Tectonics, v. 39, no. 9, p. e2020TC006252.
Zhao, X., Khandoker, M. A. R., and Golovin, K., 2020, Non-Fluorinated Omniphobic Paper with Ultralow Contact Angle Hysteresis: ACS Applied Materials & Interfaces, v. 12, no. 13, p. 15748-15756.
2019
Button, M., Cosway, K., Sui, J., and Weber, K., 2019, Impacts and fate of triclosan and sulfamethoxazole in intensified re-circulating vertical flow constructed wetlands: Science of The Total Environment, v. 649, p. 1017-1028.
Gagnon, V., Button, M., Boparai, H. K., Nearing, M., O'Carroll, D. M., and Weber, K. P., 2019, Influence of realistic wearing on the morphology and release of silver nanomaterials from textiles: Environmental Science: Nano, v. 6, no. 2, p. 411-424.
Kellett, D. A., Cottle, J. M., and Larson, K. P., 2019, The South Tibetan Detachment System: history, advances, definition and future directions: Geological Society, London, Special Publications, v. 483, no. 1, p. 377-400.
Larson, K. P., Ali, A., Shrestha, S., Soret, M., Cottle, J. M., and Ahmad, R., 2019a, Timing of metamorphism and deformation in the Swat valley, northern Pakistan: Insight into garnet-monazite HREE partitioning: Geoscience Frontiers, v. 10, no. 3, p. 849-861.
Larson, K. P., Camacho, A., Kumar, K. C., and Shrestha, S., 2019b, Kinematic implications of regional 40Ar/39Ar ages, east-central Nepal: Journal of Asian Earth Sciences, v. 172, p. 383-392.
Long, S. P., Mullady, C. L., Starnes, J. K., Gordon, S. M., Larson, K. P., Pianowski, L. S., Miller, R. B., and Soignard, E., 2019, A structural model for the South Tibetan detachment system in northwestern Bhutan from integration of temperature, fabric, strain, and kinematic data: Lithosphere, v. 11, no. 4, p. 465-487.
Mitrano, D. M., Beltzung, A., Frehland, S., Schmiedgruber, M., Cingolani, A., and Schmidt, F., 2019, Synthesis of metal-doped nanoplastics and their utility to investigate fate and behaviour in complex environmental systems: Nature Nanotechnology, v. 14, no. 4, p. 362-368.
Shrestha, S., Larson, K. P., Duesterhoeft, E., Soret, M., and Cottle, J. M., 2019, Thermodynamic modelling of phosphate minerals and its implications for the development of P-T-t histories: A case study in garnet - monazite bearing metapelites: Lithos.
Wu, S., Wu, H., Button, M., Konnerup, D., and Brix, H., 2019, Impact of engineered nanoparticles on microbial transformations of carbon, nitrogen, and phosphorus in wastewater treatment processes – A review: Science of The Total Environment, v. 660, p. 1144-1154.
Zhang, Y., Lyu, T., Zhang, L., Button, M., Arias, C. A., Weber, K. P., Shi, J., Chen, Z., Brix, H., and Carvalho, P. N., 2019, Microbial community metabolic profiles in saturated constructed wetlands treating iohexol and ibuprofen: Science of The Total Environment, v. 651, p. 1926-1934.
< 2018
Akkiraju, K., Kashyap, S., Srivastav, A. K., Chawake, N., Bichler, L., and Murty, B. S., 2017, Novel coalescence-driven grain-growth mechanism during annealing/spark plasma sintering of NiO nanocrystals: Journal of the European Ceramic Society, v. 37, no. 15, p. 4973-4977.
Button, M., Auvinen, H., Van Koetsem, F., Hosseinkhani, B., Rousseau, D., Weber, K. P., and Du Laing, G., 2016, Susceptibility of constructed wetland microbial communities to silver nanoparticles: A microcosm study: Ecological Engineering, v. 97, p. 476-485.
Davis, T. A., and Bichler, L., 2018, Novel Fabrication of a TiB2 Grain Refiner and its Effect on Reducing Hot Tearing in AZ91D Magnesium Alloy: Journal of Materials Engineering and Performance, v. 27, no. 9, p. 4444-4452.
Davis, T. A., Bichler, L., D'Elia, F., and Hort, N., 2018, Effect of TiBor on the grain refinement and hot tearing susceptibility of AZ91D magnesium alloy: Journal of Alloys and Compounds, v. 759, p. 70-79.
Doja, S., Bichler, L., and Fan, S., 2017, Corrosion Behavior of AZ31 Magnesium Alloy in Highly Alkaline Environment: Acta Metallurgica Sinica (English Letters), v. 30, no. 4, p. 367-375.
Iqbal, M. M., Murtaza, G., Naz, T., Hussain, A., Button, M., and Du Laing, G., 2018, Pb fractionation and redistribution as affected by applied inorganic amendments under different soil moisture regimes and incubation time in saline–sodic Pb-polluted paddy soil: Paddy and Water Environment, v. 16, no. 4, p. 875-885.
Parsons, A. J., Coleman, M. J., Ryan, J. J., Zagorevski, A., Joyce, N. L., Gibson, H. D., and Larson, K. P., 2018, Structural evolution of a crustal-scale shear zone through a decreasing temperature regime: The Yukon River shear zone, Yukon-Tanana terrane, Northern Cordillera: Lithosphere, v. 10, no. 6, p. 760-782.
Prasad, A., Mok, J., Lafortune, L., and Bichler, L., 2018, Grain Refinement of B319 Alloy Using Spark Plasma Sintered Al–Ti–C Grain Refiners: Transactions of the Indian Institute of Metals, v. 71, no. 11, p. 2759-2763.
Shrestha, S., Larson, K. P., Guilmette, C., and Smit, M. A., 2017, The P–T–t evolution of the exhumed Himalayan metamorphic core in the Likhu Khola region, East Central Nepal: Journal of Metamorphic Geology, v. 35, no. 6, p. 663-693.
Smith, M., Bichler, L., Gholipour, J., and Wanjara, P., 2017a, Mechanical properties and microstructural evolution of in-service Inconel 718 superalloy repaired by linear friction welding: The International Journal of Advanced Manufacturing Technology, v. 90, no. 5, p. 1931-1946.
Smith, M., Levesque, J. B., Bichler, L., Sediako, D., Gholipour, J., and Wanjara, P., 2017b, Residual stress analysis in linear friction welded in-service Inconel 718 superalloy via neutron diffraction and contour method approaches: Materials Science and Engineering: A, v. 691, p. 168-179.
Soret, M., Larson, K. P., Cottle, J. M., Smit, M., Johnson, A., Shrestha, S., Ali, A., and Faisal, S., Mesozoic to Cenozoic tectono-metamorphic history of the South Pamir – Hindu Kush (Chitral, NW Pakistan): insights from phase equilibria modelling, and garnet – monazite petrochronology: Journal of Metamorphic Geology, v. 0, no. ja.
Therriault, I., Steenkamp, H. M., Larson, K. P., and Cottle, J. M., 2018, Geochronological constraints on deformation in the Wager shear zone,northwestern Hudson Bay, Nunavut: Summary of Activities. Canada-Nunavut Geoscience Office, p. 1–14.
Venturi, C. M., Greenough, J. D., Ulansky, C., and Fipke, C., 2015, Stratigraphy, thickness, tectonic environment, and economic implications of the giant Suwar – Wadi Qutabah layered mafic complex in northwestern Yemen: Canadian Journal of Earth Sciences, v. 52, no. 2, p. 134-146.
Zhang, L., Lyu, T., Zhang, Y., Button, M., Arias, C. A., Weber, K. P., Brix, H., and Carvalho, P. N., 2018, Impacts of design configuration and plants on the functionality of the microbial community of mesocosm-scale constructed wetlands treating ibuprofen: Water Research, v. 131, p. 228-238.
Bahramian, N., Kianfar, S., Stroh, J., Sediako, D., and Tjong, J., An Investigation of the Microstructure and Oil Retention of Electrolyte Jet Plasma Oxidation (EJPO) Coating, in Proceedings Minerals, Metals and Materials Series2022, p. 629-639.
Chandra, A., and Siddiqua, S., 2022, A Novel Application of Bis (2-Hydroxyethyl) Terephthalate to Enhance Sand Bentonite Mixture for Landfills: Journal of Materials in Civil Engineering, v. 34, no. 9.
Cutts, J., and Dyck, B., 2022, Incipient collision of the Rae and Slave cratons at ca. 1.95 Ga: GSA Bulletin.
Dilawar, H., and Eskicioglu, C., 2022, Laboratory and field scale biodegradability assessment of biocomposite cellphone cases for end-of-life management: Waste Management, v. 138, p. 148-157.
Drayson, D., Camacho, A., Sanborn-Barrie, M., Regis, D., Larson, K. P., Osinchuk, A., and DuFrane, S. A., 2022, Deformation history and tectonic significance of the Sanagak Lake shear zone, Boothia Peninsula, Nunavut: Canadian Journal of Earth Sciences, v. 0, no. ja, p. null.
Elmouchi, A., Siddiqua, S., Salifu, E., and Wijewickreme, D., 2022, Muskeg Soil Stabilization Using the Microbially Induced Calcite Precipitation Technique by the Urease Active Bioslurry Approach: Journal of Geotechnical and Geoenvironmental Engineering, v. 148, no. 11.
Elsayed, A., D’Elia, F., Ravindran, C., and Sediako, D., 2022, Observing the Effect of Grain Refinement on Crystal Growth of Al and Mg Alloys during Solidification Using InSitu Neutron Diffraction: Metals, v. 12, no. 5.
Ersay, L., Greenough, J. D., Larson, K. P., and Dostal, J., 2022, Zircon reveals multistage, magmatic and hydrothermal Rare Earth Element mineralization at Debert Lake, Nova Scotia, Canada: Ore Geology Reviews, v. 144, p. 104780.
Gray, D. B., Gagnon, V., Button, M., Farooq, A. J., Patch, D. J., Wallace, S. J., Koch, I., O'Carroll, D. M., and Weber, K. P., 2022, Silver nanomaterials released from commercial textiles have minimal impacts on soil microbial communities at environmentally relevant concentrations: Science of The Total Environment, v. 806, p. 151248.
Graziani, R., Larson, K., Smit, M., Cottle, J. M., Lamming, J., and Piette-Lauzière, N., 2022, Modern style nappe stacking in the Paleoproterozoic lower crust: An example from the snowbird tectonic zone, Canadian Shield: Precambrian Research, v. 380, p. 106817.
Gyomlai, T., Agard, P., Jolivet, L., Larvet, T., Bonnet, G., Omrani, J., Larson, K., Caron, B., and Noël, J., 2022, Cimmerian metamorphism and post Mid-Cimmerian exhumation in Central Iran: Insights from in-situ Rb/Sr and U/Pb dating: Journal of Asian Earth Sciences, v. 233, p. 105242.
Hoseini, A. H. A., Shiraz, M. H. A., Tao, L., Lu, W., Arjmand, M., and Liu, J., 2022, Synthesis of soybean-derived porous carbon as selenium host for high-performance lithium-selenium batteries: Electrochimica Acta, v. 429.
Karanam, A., Prasad, A., Bichler, L., and Birnie-Browne, R., 2022, In-service Performance of High-Manganese Steel Clinker Crusher Hammer: International Journal of Metalcasting, v. 16, no. 2, p. 573-584.
Kavanagh-Lepage, C., Gervais, F., Larson, K., Grazziani, R., and Moukhsil, A., 2022, Deformation induced decoupling between U-Pb and trace elements in titanite revealed through petrochronology and study of localized deformation: Geoscience Frontiers, p. 101496.
Kozakevich, J., Stroh, J., Mallouhi, V., Sediako, D., and Weiss, D., Interplay Between Cooling Rate, Microstructure, and Mechanical Properties of an Al–Ce–Ni–Mn Alloy, in Proceedings Minerals, Metals and Materials Series2022a, p. 83-91.
Kozakevich, J., Stroh, J., Sediako, D., Weiss, D., Loukus, A., and Vogel, S. C., 2022b, Elevated Temperature Creep and Tensile Performance of Extruded Mg-10Ce Alloy: Journal of Materials Engineering and Performance.
Larson, K. P., Cottle, J. M., Camacho, A., Piercey, S., and Grujic, D., 2022a, Miocene anatexis, cooling and exhumation in the Khumbu Himal, Nepal: International Geology Review, v. 64, no. 14, p. 2008-2033.
Larson, K. P., Cottle, J. M., Kylander-Clark, A., and Lageson, D., 2022b, A plate tectonic view from the top of the world: Terra Nova, v. 34, no. 3, p. 224-230.
Larson, K. P., Shrestha, S., Cottle, J. M., Guilmette, C., Johnson, T. A., Gibson, H. D., and Gervais, F., 2022c, Re-evaluating monazite as a record of metamorphic reactions: Geoscience Frontiers, v. 13, no. 2, p. 101340.
Li, W.-T., Ding, H.-X., Zhang, Z.-M., and Larson, K. P., 2022, Petrogenesis of meta-sedimentary rocks in the deep crust of the eastern Gangdese arc: Lithos, v. 430, p. 106884.
Lihter, I., Larson, K. P., Smit, M. A., Cottle, J. M., Ashley, K. T., and Shrestha, S., 2022, Decrypting the polymetamorphic record of the Himalaya: Geology, v. 50, no. 5, p. 588-592.
Liu, H., Basar, I. A., Lyczko, N., Nzihou, A., and Eskicioglu, C., 2022, Incorporating hydrothermal liquefaction into wastewater treatment – Part I: Process optimization for energy recovery and evaluation of product distribution: Chemical Engineering Journal, v. 449, p. 137838.
Soret, M., Bonnet, G., Agard, P., Larson, K., Cottle, J., Dubacq, B., Kylander-Clark, A., Button, M., and Rividi, N., 2022, Timescales of subduction initiation and evolution of subduction thermal regimes: Earth and Planetary Science Letters, v. 584, p. 117521.
Tummalapalli, M. K., Szpunar, J. A., Prasad, A., Malakkal, L., and Bichler, L., 2022, Evaluation of thermophysical properties of UO2-10 Vol% Mo nuclear fuel pellets: Journal of Nuclear Materials, v. 559.
Watts, M., Argyraki, A., Barbieri, M., Brown, A., Button, M., Finkelman, R., Gibson, G., Humphrey, O., Huo, X., and Hursthouse, A., 2022, The society for environmental geochemistry and health (SEGH): 50 years and beyond: Environmental Geochemistry and Health, p. 1-7.
Wu, Z., Zou, J., Shabanian, S., Golovin, K., and Liu, J., 2022a, The roles of electrolyte chemistry in hard carbon anode for potassium-ion batteries: Chemical Engineering Journal, v. 427.
Wu, Z., Zou, J., Zhang, Y., Lin, X., Fry, D., Wang, L., and Liu, J., 2022b, Lignin-derived hard carbon anode for potassium-ion batteries: Interplay among lignin molecular weight, material structures, and storage mechanisms: Chemical Engineering Journal, v. 427.
Zhu, H., Shiraz, M. H. A., Liu, L., Zhang, Y., and Liu, J., 2022, Atomic layer deposited aluminum oxynitride coating for high-performance Si anode in lithium-ion batteries: Applied Surface Science, v. 578.
2021
Ajabi Naeini, A., Siddiqua, S., and Cherian, C., 2021, A novel stabilized rammed earth using pulp mill fly ash as alternative low carbon cementing material: Construction and Building Materials, v. 300, p. 124003.
Archibald, D. B., Macquarrie, L. M. G., Murphy, J. B., Strachan, R. A., McFarlane, C. R. M., Button, M., Larson, K. P., and Dunlop, J., 2021, The construction of the Donegal composite batholith, Irish Caledonides: Temporal constraints from U-Pb dating of zircon and titanite: GSA Bulletin.
Bigul, P., and Sumi, S., 2021, Understanding the Effect of Pulp Mill Fly Ash on Strength, Compressibility, and Microstructure of Organic Soil: International Journal of Geomechanics, v. 21, no. 11, p. 04021209.
Cherian, C., and Siddiqua, S., 2021, Engineering and environmental evaluation for utilization of recycled pulp mill fly ash as binder in sustainable road construction: Journal of Cleaner Production, v. 298, p. 126758.
Dong, H., Larson, K. P., Kellett, D. A., Xu, Z., Li, G., Cao, H., Yi, Z., and Zeng, L., 2021, Timing of slip across the South Tibetan detachment system and Yadong–Gulu graben, Eastern Himalaya: Journal of the Geological Society, v. 178, no. 1.
Graziani, R., Larson, K. P., Law, R. D., Vanier, M.-A., and Thigpen, J. R., 2021, A refined approach for quantitative kinematic vorticity number estimation using microstructures: Journal of Structural Geology, v. 153, p. 104459.
Greenough, J. D., Kamo, S. L., Davis, D. W., Larson, K., Zhang, Z., Layton-Matthews, D., De Vera, J., and Bergquist, B. A., 2021, Old subcontinental mantle zircon below Oahu: Communications Earth & Environment, v. 2, no. 1, p. 189.
Johnson, T. A., Cottle, J. M., and Larson, K. P., 2021, Delineation of multiple metamorphic events in the Himalayan Kathmandu Complex, central Nepal: Journal of Metamorphic Geology, v. 39, no. 4, p. 443-472.
Karanam, A., Prasad, A., Bichler, L., and Birnie-Browne, R., 2021, In-service Performance of High-Manganese Steel Clinker Crusher Hammer: International Journal of Metalcasting.
Kazemi, K. K., Zarifi, T., Mohseni, M., Narang, R., Golovin, K., and Zarifi, M. H., 2021, Smart Superhydrophobic Textiles Utilizing a Long-Range Antenna Sensor for Hazardous Aqueous Droplet Detection plus Prevention: ACS Applied Materials & Interfaces, v. 13, no. 29, p. 34877-34888.
Khan, A., Faisal, S., Larson, K. P., Robinson, D. M., Li, H., Ullah, Z., Button, M., Nawab, J., Farhan, M., and Ali, L., 2021a, Geochemistry and in-situ U-Th/Pb geochronology of the Jambil meta-carbonatites, northern Pakistan: Implications on petrogenesis and tectonic evolution: Journal of Earth Science.
Khan, A., Faisal, S., Larson, K. P., Robinson, D. M., Ullah, Z., Li, H., and Rehman, H. u., 2021b, New geochronological and geochemical constraints on petrogenesis and tectonic setting of the Loe-Shilman carbonatite complex, Northwest Pakistan: Lithos, v. 404-405, p. 106497.
Khanal, G. P., Wang, J.-M., Larson, K. P., Wu, F.-Y., Rai, S. M., Wang, J.-G., and Yang, L., 2021, Eocene Metamorphism and Anatexis in the Kathmandu Klippe, Central Nepal: Implications for Early Crustal Thickening and Initial Rise of the Himalaya: Tectonics, v. 40, no. 4, p. e2020TC006532.
Kianfar, S., Aghaie, E., Stroh, J., Sediako, D., and Tjong, J., 2021, Residual stress, microstructure, and mechanical properties analysis of HPDC aluminum engine block with cast-in iron liners: Materials Today Communications, v. 26, p. 101814.
Larson, K. P., Cottle, J. M., Camacho, A., Piercey, S., and Grujic, D., 2021, Miocene anatexis, cooling and exhumation in the Khumbu Himal, Nepal: International Geology Review, p. 1-26.
Mehdizadeh Omrani, M., Kumar, H., Mohamed, M. G. A., Golovin, K., S. Milani, A., Hadjizadeh, A., and Kim, K., 2021, Polyether ether ketone surface modification with plasma and gelatin for enhancing cell attachment: Journal of Biomedical Materials Research Part B: Applied Biomaterials, v. 109, no. 5, p. 622-629.
Mohseni, M., Recla, L., Mora, J., Gallego, P. G., Agüero, A., and Golovin, K., 2021, Quasicrystalline Coatings Exhibit Durable Low Interfacial Toughness with Ice: ACS Applied Materials & Interfaces, v. 13, no. 30, p. 36517-36526.
Muhammad, N., and Siddiqua, S., 2021, Moisture-dependent resilient modulus of chemically treated subgrade soil: Engineering Geology, v. 285, p. 106028.
Pokharel, B., and Siddiqua, S., 2021, Effect of calcium bentonite clay and fly ash on the stabilization of organic soil from Alberta, Canada: Engineering Geology, v. 293, p. 106291.
Soret, M., Bonnet, G., Agard, P., Larson, K., Cottle, J., Dubacq, B., Kylander-Clark, A., Button, M., and Rividi, N., Slow subduction initiation drives fast mantle upwelling and lithosphere formation2021/04/1 2021a, p. EGU21-14473.
Soret, M., Larson, K. P., Cottle, J., and Ali, A., 2021b, How Himalayan collision stems from subduction: Geology, v. 49, no. 8, p. 894-898.
Stroh, J., Sediako, D., Hanes, T., Anderson, K., and Monroe, A., 2021a, The Effects of Heat Treatment on the Microstructure and Tensile Properties of an HPDC Marine Transmission Gearcase: Metals, v. 11, no. 3, p. 517.
Stroh, J., Sediako, D., and Weiss, D., 2021b, Development of Cerium-Reinforced Specialty Aluminum Alloy with Application of X-ray and Neutron Diffraction: International Journal of Metalcasting, v. 15, no. 1, p. 29-39.
Stroh, J., Sediako, D., and Weiss, D., 2021c, The Effect of Rare Earth Mischmetal on the High Temperature Tensile Properties of an A356 Aluminum Alloy, Light Metals 2021: 50th Anniversary Edition, p. 184-191.
Stroh, J., Sediako, D., and Weiss, D., 2021d, The Effects of Iron-Bearing Intermetallics on the Fitness-for-Service Performance of a Rare-Earth-Modified A356 Alloy for Next Generation Automotive Powertrains: Metals, v. 11, no. 5, p. 788.
Wiltshire, B. D., Mirshahidi, K., Nadaraja, A. V., Shabanian, S., Hajiraissi, R., Zarifi, M. H., and Golovin, K., 2021, Oleophobic textiles with embedded liquid and vapor hazard detection using differential planar microwave resonators: Journal of Hazardous Materials, v. 409, p. 124945.
Wu, Z., Zou, J., Shabanian, S., Golovin, K., and Liu, J., 2022, The roles of electrolyte chemistry in hard carbon anode for potassium-ion batteries: Chemical Engineering Journal, v. 427, p. 130972.
2020
Archibald, D. B., Macquarrie, L. M., Murphy, J. B., Strachan, R., McFarlane, C. R., Button, M., Larson, K. P., and Dunlop, J. N., 2020, The construction of the Donegal composite batholith, Irish Caledonides: temporal constraints from U-Pb dating of zircon and titanite: Bulletin of the Geological Society of America.
Brubacher, A. D., Larson, K. P., Cottle, J. M., Matthews, W., and Camacho, A., 2020, Progressive development of EW extension across the Tibetan plateau: A case study of the Thakkhola graben, west-central Nepal: International Geology Review, p. 1-20.
Button, M., Koch, I., Watts, M. J., and Reimer, K. J., 2020, Arsenic speciation in the bracket fungus Fomitopsis betulina from contaminated and pristine sites: Environmental Geochemistry and Health.
Graziani, R., Larson, K. P., and Soret, M., 2020, The effect of hydrous mineral content on competitive strain localization mechanisms in felsic granulites: Journal of Structural Geology, v. 134, p. 104015.
Johnson, T. A., Cottle, J. M., and Larson, K. P., 2020, delineation of multiple metamorphic events in the Himalayan Kathmandu complex, central Nepal: Journal of Metamorphic Geology.
Larson, K. P., Graziani, R., Cottle, J. M., Apen, F., Corthouts, T., and Lageson, D., 2020a, The structural evolution of the Qomolangma Formation, Mount Everest, Nepal: Journal of Structural Geology, v. 138, p. 104123.
Larson, K. P., Kellett, D. A., Cottle, J. M., Camacho, A., and Brubacher, A. D., 2020b, Mid‐Miocene initiation of E‐W extension and recoupling of the Himalaya: Terra Nova, v. 32, no. 2, p. 151-158.
Larson, K. P., Shrestha, S., Soret, M., and Smit, M., 2020c, The PTtD evolution of the Mahabharat, east-central Nepal: The out-of-sequence development of the Himalaya: Geoscience Frontiers.
Lihter, I., Larson, K. P., Shrestha, S., Cottle, J. M., and Brubacher, A. D., 2020, Contact metamorphism of the Tethyan Sedimentary Sequence, Upper Mustang region, west-central Nepal: Geological Magazine, v. 157, no. 11, p. 1917-1932.
Long, S. P., Kohn, M. J., Kerswell, B. C., Starnes, J. K., Larson, K. P., Blackford, N. R., and Soignard, E., 2020, Thermometry and microstructural analysis imply protracted extensional exhumation of the Tso Morari UHP nappe, northwestern Himalaya: implications for models of UHP exhumation: Tectonics, v. 39, no. 12, p. e2020TC006482.
Piette-Lauzière, N., Larson, K., Kellett, D., and Graziani, R., 2020, Intracrystalline vorticity record of flow kinematics during shear zone reactivation: Journal of Structural Geology, v. 140, p. 104134.
Ruppelt, J. P., Tondera, K., Wallace, S. J., Button, M., Pinnekamp, J., and Weber, K. P., 2020, Assessing the role of microbial communities in the performance of constructed wetlands used to treat combined sewer overflows: Science of The Total Environment, v. 736, p. 139519.
Shrestha, S., Larson, K. P., Martin, A. J., Guilmette, C., Smit, M. A., and Cottle, J. M., 2020, The Greater Himalayan thrust belt: Insight into the assembly of the exhumed Himalayan metamorphic core, Modi Khola valley, central Nepal: Tectonics, v. 39, no. 9, p. e2020TC006252.
Zhao, X., Khandoker, M. A. R., and Golovin, K., 2020, Non-Fluorinated Omniphobic Paper with Ultralow Contact Angle Hysteresis: ACS Applied Materials & Interfaces, v. 12, no. 13, p. 15748-15756.
2019
Button, M., Cosway, K., Sui, J., and Weber, K., 2019, Impacts and fate of triclosan and sulfamethoxazole in intensified re-circulating vertical flow constructed wetlands: Science of The Total Environment, v. 649, p. 1017-1028.
Gagnon, V., Button, M., Boparai, H. K., Nearing, M., O'Carroll, D. M., and Weber, K. P., 2019, Influence of realistic wearing on the morphology and release of silver nanomaterials from textiles: Environmental Science: Nano, v. 6, no. 2, p. 411-424.
Kellett, D. A., Cottle, J. M., and Larson, K. P., 2019, The South Tibetan Detachment System: history, advances, definition and future directions: Geological Society, London, Special Publications, v. 483, no. 1, p. 377-400.
Larson, K. P., Ali, A., Shrestha, S., Soret, M., Cottle, J. M., and Ahmad, R., 2019a, Timing of metamorphism and deformation in the Swat valley, northern Pakistan: Insight into garnet-monazite HREE partitioning: Geoscience Frontiers, v. 10, no. 3, p. 849-861.
Larson, K. P., Camacho, A., Kumar, K. C., and Shrestha, S., 2019b, Kinematic implications of regional 40Ar/39Ar ages, east-central Nepal: Journal of Asian Earth Sciences, v. 172, p. 383-392.
Long, S. P., Mullady, C. L., Starnes, J. K., Gordon, S. M., Larson, K. P., Pianowski, L. S., Miller, R. B., and Soignard, E., 2019, A structural model for the South Tibetan detachment system in northwestern Bhutan from integration of temperature, fabric, strain, and kinematic data: Lithosphere, v. 11, no. 4, p. 465-487.
Mitrano, D. M., Beltzung, A., Frehland, S., Schmiedgruber, M., Cingolani, A., and Schmidt, F., 2019, Synthesis of metal-doped nanoplastics and their utility to investigate fate and behaviour in complex environmental systems: Nature Nanotechnology, v. 14, no. 4, p. 362-368.
Shrestha, S., Larson, K. P., Duesterhoeft, E., Soret, M., and Cottle, J. M., 2019, Thermodynamic modelling of phosphate minerals and its implications for the development of P-T-t histories: A case study in garnet - monazite bearing metapelites: Lithos.
Wu, S., Wu, H., Button, M., Konnerup, D., and Brix, H., 2019, Impact of engineered nanoparticles on microbial transformations of carbon, nitrogen, and phosphorus in wastewater treatment processes – A review: Science of The Total Environment, v. 660, p. 1144-1154.
Zhang, Y., Lyu, T., Zhang, L., Button, M., Arias, C. A., Weber, K. P., Shi, J., Chen, Z., Brix, H., and Carvalho, P. N., 2019, Microbial community metabolic profiles in saturated constructed wetlands treating iohexol and ibuprofen: Science of The Total Environment, v. 651, p. 1926-1934.
< 2018
Akkiraju, K., Kashyap, S., Srivastav, A. K., Chawake, N., Bichler, L., and Murty, B. S., 2017, Novel coalescence-driven grain-growth mechanism during annealing/spark plasma sintering of NiO nanocrystals: Journal of the European Ceramic Society, v. 37, no. 15, p. 4973-4977.
Button, M., Auvinen, H., Van Koetsem, F., Hosseinkhani, B., Rousseau, D., Weber, K. P., and Du Laing, G., 2016, Susceptibility of constructed wetland microbial communities to silver nanoparticles: A microcosm study: Ecological Engineering, v. 97, p. 476-485.
Davis, T. A., and Bichler, L., 2018, Novel Fabrication of a TiB2 Grain Refiner and its Effect on Reducing Hot Tearing in AZ91D Magnesium Alloy: Journal of Materials Engineering and Performance, v. 27, no. 9, p. 4444-4452.
Davis, T. A., Bichler, L., D'Elia, F., and Hort, N., 2018, Effect of TiBor on the grain refinement and hot tearing susceptibility of AZ91D magnesium alloy: Journal of Alloys and Compounds, v. 759, p. 70-79.
Doja, S., Bichler, L., and Fan, S., 2017, Corrosion Behavior of AZ31 Magnesium Alloy in Highly Alkaline Environment: Acta Metallurgica Sinica (English Letters), v. 30, no. 4, p. 367-375.
Iqbal, M. M., Murtaza, G., Naz, T., Hussain, A., Button, M., and Du Laing, G., 2018, Pb fractionation and redistribution as affected by applied inorganic amendments under different soil moisture regimes and incubation time in saline–sodic Pb-polluted paddy soil: Paddy and Water Environment, v. 16, no. 4, p. 875-885.
Parsons, A. J., Coleman, M. J., Ryan, J. J., Zagorevski, A., Joyce, N. L., Gibson, H. D., and Larson, K. P., 2018, Structural evolution of a crustal-scale shear zone through a decreasing temperature regime: The Yukon River shear zone, Yukon-Tanana terrane, Northern Cordillera: Lithosphere, v. 10, no. 6, p. 760-782.
Prasad, A., Mok, J., Lafortune, L., and Bichler, L., 2018, Grain Refinement of B319 Alloy Using Spark Plasma Sintered Al–Ti–C Grain Refiners: Transactions of the Indian Institute of Metals, v. 71, no. 11, p. 2759-2763.
Shrestha, S., Larson, K. P., Guilmette, C., and Smit, M. A., 2017, The P–T–t evolution of the exhumed Himalayan metamorphic core in the Likhu Khola region, East Central Nepal: Journal of Metamorphic Geology, v. 35, no. 6, p. 663-693.
Smith, M., Bichler, L., Gholipour, J., and Wanjara, P., 2017a, Mechanical properties and microstructural evolution of in-service Inconel 718 superalloy repaired by linear friction welding: The International Journal of Advanced Manufacturing Technology, v. 90, no. 5, p. 1931-1946.
Smith, M., Levesque, J. B., Bichler, L., Sediako, D., Gholipour, J., and Wanjara, P., 2017b, Residual stress analysis in linear friction welded in-service Inconel 718 superalloy via neutron diffraction and contour method approaches: Materials Science and Engineering: A, v. 691, p. 168-179.
Soret, M., Larson, K. P., Cottle, J. M., Smit, M., Johnson, A., Shrestha, S., Ali, A., and Faisal, S., Mesozoic to Cenozoic tectono-metamorphic history of the South Pamir – Hindu Kush (Chitral, NW Pakistan): insights from phase equilibria modelling, and garnet – monazite petrochronology: Journal of Metamorphic Geology, v. 0, no. ja.
Therriault, I., Steenkamp, H. M., Larson, K. P., and Cottle, J. M., 2018, Geochronological constraints on deformation in the Wager shear zone,northwestern Hudson Bay, Nunavut: Summary of Activities. Canada-Nunavut Geoscience Office, p. 1–14.
Venturi, C. M., Greenough, J. D., Ulansky, C., and Fipke, C., 2015, Stratigraphy, thickness, tectonic environment, and economic implications of the giant Suwar – Wadi Qutabah layered mafic complex in northwestern Yemen: Canadian Journal of Earth Sciences, v. 52, no. 2, p. 134-146.
Zhang, L., Lyu, T., Zhang, Y., Button, M., Arias, C. A., Weber, K. P., Brix, H., and Carvalho, P. N., 2018, Impacts of design configuration and plants on the functionality of the microbial community of mesocosm-scale constructed wetlands treating ibuprofen: Water Research, v. 131, p. 228-238.
